Solar Make Money The typical household uses 10,000 to 15,000 BTUs of hot water per person per day. A 20 vacuum tube solar collector can produce 30,000 BTUs on a summer ... more>>
CONTACT US

Tele:86-573-87887788
Fax:86-573-87888722

Mr Simon Chen:
Email:hyp@hurrassolar.com

Ms Jessica Zhuang:
Email:hcc@hurrassolar.com

Add: Solar Energy Zone, Yuanhua, Haining, Jiaxing, Zhejiang, China

FAQ
Are solar tube collectors more
2011/1/4 9:43:40  Hit:7786
[ Word size:Big Middle Small ]
Are solar tube collectors more efficient than flat plate collectors?
When comparing peak efficiency levels it may seem that there is little difference between flat plate and evacuated tubes, in fact flat plate may actually be higher, but this is during minimal heat loss conditions. When averaged over a year evacuated tube collector have a clear advantage.
1. Due to the cylindrical shape of the evacuated tube, the solar tubes are able to passively track the sun throughout the day. Flat plate collector only provide peak energy output at midday when the sun is perpendicular to the collector? surface.
2. Air is evacuated from the solar tube to form a vacuum. This greatly reduces conductive and convective heat loss from the interior of the tube. As a result wind and cold temperatures have less effect on the efficiency of the evacuated tube collector.
3. Bole solar collectors can often be used in subzero temperatures without the system sustaining damage. Flat plate systems often require expensive and complicated "antifreeze" systems to be installed.

4. Evacuated tubes are strong, long lasting, and should one be broken, inexpensive and easy to replace. If a flat plate collector panel is damaged the whole panel must be replaced.
5. Due to the high efficiency absorption of solar radiation even during overcast conditions, combined with excellent insulative properties of the solar tube, solar tube collectors can heat water all year round (backup from gas and electricity is still required).
6. Due to the various advantages of evacuated tube collector over flat plate collectors, a smaller collector can be used to provide the same heating performance. For example, a standard household of 4-5 people would usually require a 250-300L water storage tank. Depending on your location, only 30 evacuated tubes would be required to provide all summer hot water needs and a large percentage in other seasons.
7. Flat plate solar collectors can produce similar heat output to evacuated tube collectors, but generally only during hot, sunny conditions. When averaged over an entire year, evacuated tube collector heat output per net m2 of absorber area, is between 25% to 40% greater that a flat plate collector.
Link: www.solar-water-heater.us
Copyright (C)2010:Zhejiang Hurras Solar Energy Technology Co., Ltd.
Technology Supported by:Hangzhou Chuangyi Science & Technic Company(EC-world)